IR Receiver designed for Atlona extenders
Uses standard, 12 volt-based system
Red status LED provides positive indication that the receiver is capturing a signal from the IR remote control
Three-pin conductor cable with stripped ends; Signal, Ground, and Power conductors
Length: 6.6 ft. (2 m)
Self-adhesive backing
Multi-function sensor that detects occupancy, temperature, and ambient light level
IP-enabled for communicating state information over Ethernet
Works with WAVE, Velocity, and Omega products to automate system operation
Supports network communications with third-party devices using common protocols
Customizable detection area covering from 900 ft2 (83.6 m2) – 2,000 ft2 (185.8 m2)