Best Sellers

  • Show Sidebar

There are 20108 products.

Active filters

ZH420

$1,196.43
1080p (1920x1080), 4300 Lumens, 300,000:1 Contrast, Laser Light Source, 30K Hours (ECO), 1.12:1 ~ 1.47:1 Throw Ratio, 2xHDMI 2.0, 1x Audio Out 3.5mm, 1x USB-A Power 1.5A, 1x RS232, RJ-45. 3� Year� limited parts and labor warranty on the projector, 5-year or 12,000 hour light source warranty (whichever comes first)

DA-PLEX 69 X 110 16:10 STAND

$7,629.00
The Da-Plex is the optimal rigid rear projection screen with eight coating options formulated to fit your application requirements. The Da-Plex is an acrylic, lightweight rigid rear projection screen, and coatings are permanently bonded to the substrate and cannot peel off.

IR Receiver Cable for Atlona Extenders

$45.90
IR Receiver designed for Atlona extenders Uses standard, 12 volt-based system Red status LED provides positive indication that the receiver is capturing a signal from the IR remote control Three-pin conductor cable with stripped ends; Signal, Ground, and Power conductors Length: 6.6 ft. (2 m) Self-adhesive backing

ZH420

$1,196.43
1080p (1920x1080), 4300 Lumens, 300,000:1 Contrast, Laser Light Source, 30K Hours (ECO), 1.12:1 ~ 1.47:1 Throw Ratio, 2xHDMI 2.0, 1x Audio Out 3.5mm, 1x USB-A Power 1.5A, 1x RS232, RJ-45. 3� Year� limited parts and labor warranty on the projector, 5-year or 12,000 hour light source warranty (whichever comes first)

DA-PLEX 69 X 110 16:10 STAND

$7,629.00
The Da-Plex is the optimal rigid rear projection screen with eight coating options formulated to fit your application requirements. The Da-Plex is an acrylic, lightweight rigid rear projection screen, and coatings are permanently bonded to the substrate and cannot peel off.

IR Receiver Cable for Atlona Extenders

$45.90
IR Receiver designed for Atlona extenders Uses standard, 12 volt-based system Red status LED provides positive indication that the receiver is capturing a signal from the IR remote control Three-pin conductor cable with stripped ends; Signal, Ground, and Power conductors Length: 6.6 ft. (2 m) Self-adhesive backing